Tension machine is a kind of feedthrough pre-tensioing jack with a tension rod in the center, having 4 types of tensioning strength, namely: 1000 KN, 2000 KN, 3000 KN, 4000 KN. As the end of the tension rod is connected to the anchor with thread, it can be applied to various forged anchors, chilled iron anchor used for stayed-cable bridge and other similar anchors, as well as pre-tension pulling for pipes. In accordance with actual requirement, the support of two heavy-weight jacks can be replaced with a baseplate and rolling hinged bearing provided by the manufacturer, to be used as a vertical jack, or for horizontal pushing during installation. The customer can also demand a change in thread specifications for the connection of the anchor to enlarge the scope of application.

Tension machine is a kind of feedthrough pre-tensioing jack with a tension rod in the center, having 4 types of tensioning strength, namely: 1000 KN, 2000 KN, 3000 KN, 4000 KN. As the end of the tension rod is connected to the anchor with thread, it can be applied to various forged anchors, chilled iron anchor used for stayed-cable bridge and other similar anchors, as well as pre-tension pulling for pipes. In accordance with actual requirement, the support of two heavy-weight jacks can be replaced with a baseplate and rolling hinged bearing provided by the manufacturer, to be used as a vertical jack, or for horizontal pushing during installation. The customer can also demand a change in thread specifications for the connection of the anchor to enlarge the scope of application.

The auto machine matched with cutter and heading machine together,achieve to auto cutting,heading and moving bar away way .NC controller,mote adopts VFD,accurate speed,stably work,handle and Automatic way change any time,it can work in any where,easy installation,energy-efficient,after sale service with commercial cost. The machine is easy to operate, with high-quality processing and high speed, free from the impact of the environment, which could upset 16-40mm HRB335 and HRB400 grade steel rebar.

Prestressed tension is to pre-tension in the members, so that the pre-tensioned members are subjected to tensile stress, and then make them produce a certain deformation, to cope with the load of the steel structure itself, including the load of the roof weight, wind load, snow load, earthquake load and so on. Generally, steel strands, jacks, anchor plates, splints are used for tensioning.

Quick Details Applicable Industries:Building Material Shops, Construction works , Energy & Mining After-sales Service Provided:Online support, Field installation, commissioning and training Warranty:1 Year Product name:heading machine Capacity:15KVA Color:Customer's Requirement Weight:1200kg Length:10.4m-34.4m

The auto bar moving machine matched with cutter and heading machine together,achieve to auto cutting,heading and moving bar away way .NC controller,mote adopts VFD,accurate speed,stably work,handle and Automatic way change any time,it can work in any where,easy installation,energy-efficient,after sale service with commercial cost. The machine is easy to operate, with high-quality processing and high speed, free from the impact of the environment, which could upset 16-40mm HRB335 and HRB400 grade steel rebar.

Vertical radial extrusion pipe manufacturing technology as a new type of pipe manufacturing technology has the greatest advantage of using dry and hard concrete, vertical production can be immediately demoulded.Instantaneous extrusion molding, each tubeonly 2 to 4 minutes, high production efficiency. The radial extrusion pipe-making machine issuitable for producing small and medium-sized concrete drainage pipes. Its diameter range is300mm-1200mm. Its standard length is 2-3m. It can also produce reinforced concrete cement pipes with flexible joints and pipe jacking without reinforced concrete cement pipes.

The auto bar moving machine matched with cutter and heading machine together,achieve to auto cutting,heading and moving bar away way .NC controller,mote adopts VFD,accurate speed,stably work,handle and Automatic way change any time,it can work in any where,easy installation,energy-efficient,after sale service with commercial cost. The machine is easy to operate, with high-quality processing and high speed, free from the impact of the environment, which could upset 16-40mm HRB335 and HRB400 grade steel rebar.

1.Equipped with Chinese powerful and reliable engines with excellent environmental performance; 2.Equipped with OPS or ORS seat and brake switch to prevent incorrect operation and secure the driver and the forklift from all sides. 3.install optional three-way catalytic device to lower the harmful emission beside of low emission engines; Adopt soundproof cotton to ease noise and high exhaust system as option to reduce dust.

Automatic batching machine with frequency control of motor speed system,material door switch is controlled by a separate hydraulic unit,hopper with electric hoist,equipped with vibration device for meterial.according to user requirements,make theleft and right symmetrical configuation operation. For the consistence feeding of concrete into mold,feeding machine is the solution.The feeding concrete is done by having mold sits on trolley.The trolley moves inward to insert the concrete injection pipe into the center of the mold.As the trolley moves outward,predetermined volume of concrete is displaced into the mold.The speed of trolley and the volume of the concrete are electrically programmed to ensure high consistency of concrete volume throughout the production process.This will eliminate wastage of concrete.